Lesson 12 – Wake on Lan

This feature enables you to wake up devices ad-hoc or with a time trigger.  You can wake up a group of filtered devices (filter), group of devices (Group) or a single device (Device) by typing in the Device ID.  Advanced wake-on-Lan settings are used in case the network rules are more strict and require broadcast address and port for execution

Note: In order to use the Wake On Lan feature please consider the following;

1. All devices need to be on the same wired network
2. The Clevertouch screen needs to be woken up from another device on the same network
3. Wake On Lan must be enabled from within the Clevertouch Debug menu